You are viewing documentation for an outdated version of Debezium.
If you want to view the latest stable version of this page, please go here.

Debezium Engine

Debezium connectors are normally operated by deploying them to a Kafka Connect service, and configuring one or more connectors to monitor upstream databases and produce data change events for all changes that they see in the upstream databases. Those data change events are written to Kafka, where they can be independently consumed by many different applications. Kafka Connect provides excellent fault tolerance and scalability, since it runs as a distributed service and ensures that all registered and configured connectors are always running. For example, even if one of the Kafka Connect endpoints in a cluster goes down, the remaining Kafka Connect endpoints will restart any connectors that were previously running on the now-terminated endpoint, minimizing downtime and eliminating administrative activities.

Not every application needs this level of fault tolerance and reliability, and they may not want to rely upon an external cluster of Kafka brokers and Kafka Connect services. Instead, some applications would prefer to embed Debezium connectors directly within the application space. They still want the same data change events, but prefer to have the connectors send them directly to the application rather than persist them inside Kafka.

This debezium-api module defines a small API that allows an application to easily configure and run Debezium connectors using Debezium Engine.

Dependencies

To use Debezium Engine module, add the debezium-api module to your application’s dependencies. There is one out-of-the-box implementation of this API in debezium-embedded module which should be added to the dependencies too. For Maven, this entails adding the following to your application’s POM:

<dependency>
    <groupId>io.debezium</groupId>
    <artifactId>debezium-api</artifactId>
    <version>${version.debezium}</version>
</dependency>
<dependency>
    <groupId>io.debezium</groupId>
    <artifactId>debezium-embedded</artifactId>
    <version>${version.debezium}</version>
</dependency>

where ${version.debezium} is either the version of Debezium you’re using or a Maven property whose value contains the Debezium version string.

Likewise, add dependencies for each of the Debezium connectors that your application will use. For example, the following can be added to your application’s Maven POM file so your application can use the MySQL connector:

<dependency>
    <groupId>io.debezium</groupId>
    <artifactId>debezium-connector-mysql</artifactId>
    <version>${version.debezium}</version>
</dependency>

Or for the MongoDB connector:

<dependency>
    <groupId>io.debezium</groupId>
    <artifactId>debezium-connector-mongodb</artifactId>
    <version>${version.debezium}</version>
</dependency>

The remainder of this document describes embedding the MySQL connector in your application. Other connectors are used in a similar manner, except with connector-specific configuration, topics, and events.

In the Code

Your application needs to set up an embedded engine for each connector instance you want to run. The io.debezium.engine.DebeziumEngine<R> class serves as an easy-to-use wrapper around any Debezium connector and completely manages the connector’s lifecycle. You create the DebeziumEngine instance using its builder API, providing the following things:

  • The format in which you want to receive the message, e.g. JSON, Avro or as Kafka Connect SourceRecord (see output message formats)

  • Configuration properties (perhaps loaded from a properties file) that define the environment for both the engine and the connector

  • A method that will be called for every data change event produced by the connector

Here’s an example of code that configures and runs an embedded MySQL connector:

// Define the configuration for the Debezium Engine with MySQL connector...
final Properties props = config.asProperties();
props.setProperty("name", "engine");
props.setProperty("offset.storage", "org.apache.kafka.connect.storage.FileOffsetBackingStore");
props.setProperty("offset.storage.file.filename", "/tmp/offsets.dat");
props.setProperty("offset.flush.interval.ms", "60000");
/* begin connector properties */
props.setProperty("database.hostname", "localhost");
props.setProperty("database.port", "3306");
props.setProperty("database.user", "mysqluser");
props.setProperty("database.password", "mysqlpw");
props.setProperty("database.server.id", "85744");
props.setProperty("topic.prefix", "my-app-connector");
props.setProperty("schema.history.internal",
      "io.debezium.storage.file.history.FileSchemaHistory");
props.setProperty("schema.history.internal.file.filename",
      "/path/to/storage/schemahistory.dat");

// Create the engine with this configuration ...
try (DebeziumEngine<ChangeEvent<String, String>> engine = DebeziumEngine.create(Json.class)
        .using(props)
        .notifying(record -> {
            System.out.println(record);
        }).build()
    ) {
    // Run the engine asynchronously ...
    ExecutorService executor = Executors.newSingleThreadExecutor();
    executor.execute(engine);

    // Do something else or wait for a signal or an event
}
// Engine is stopped when the main code is finished

Let’s look into this code in more detail, starting with the first few lines that we repeat here:

// Define the configuration for the Debezium Engine with MySQL connector...
final Properties props = config.asProperties();
props.setProperty("name", "engine");
props.setProperty("connector.class", "io.debezium.connector.mysql.MySqlConnector");
props.setProperty("offset.storage", "org.apache.kafka.connect.storage.FileOffsetBackingStore");
props.setProperty("offset.storage.file.filename", "/tmp/offsets.dat");
props.setProperty("offset.flush.interval.ms", 60000);

This creates a new standard Properties object to set several fields required by the engine regardless of which connector is being used. The first is a name for the engine that will be used within the source records produced by the connector and its internal state, so use something meaningful in your application. The connector.class field defines the name of the class that extends the Kafka Connect org.apache.kafka.connect.source.SourceConnector abstract class; in this example, we specify Debezium’s MySqlConnector class.

When a Kafka Connect connector runs, it reads information from the source and periodically records "offsets" that define how much of that information it has processed. Should the connector be restarted, it will use the last recorded offset to know where in the source information it should resume reading. Since connectors don’t know or care how the offsets are stored, it is up to the engine to provide a way to store and recover these offsets. The next few fields of our configuration specify that our engine should use the FileOffsetBackingStore class to store offsets in the /path/to/storage/offset.dat file on the local file system (the file can be named anything and stored anywhere). Additionally, although the connector records the offsets with every source record it produces, the engine flushes the offsets to the backing store periodically (in our case, once each minute). These fields can be tailored as needed for your application.

The next few lines define the fields that are specific to the connector (documented in per-connector docs), which in our example is the MySqlConnector connector:

    /* begin connector properties */
    props.setProperty("database.hostname", "localhost")
    props.setProperty("database.port", "3306")
    props.setProperty("database.user", "mysqluser")
    props.setProperty("database.password", "mysqlpw")
    props.setProperty("database.server.id", "85744")
    props.setProperty("topic.prefix", "my-app-connector")
    props.setProperty("schema.history.internal",
          "io.debezium.storage.file.history.FileSchemaHistory")
    props.setProperty("schema.history.internal.file.filename",
          "/path/to/storage/schemahistory.dat")

Here, we set the name of the host machine and port number where the MySQL database server is running, and we define the username and password that will be used to connect to the MySQL database. Note that for MySQL the username and password should correspond to a MySQL database user that has been granted the following MySQL permissions:

  • SELECT

  • RELOAD

  • SHOW DATABASES

  • REPLICATION SLAVE

  • REPLICATION CLIENT

The first three privileges are required when reading a consistent snapshot of the databases. The last two privileges allow the database to read the server’s binlog that is normally used for MySQL replication.

The configuration also includes a numeric identifier for the server.id. Since MySQL’s binlog is part of the MySQL replication mechanism, in order to read the binlog the MySqlConnector instance must join the MySQL server group, and that means this server ID must be unique within all processes that make up the MySQL server group and is any integer between 1 and 232-1. In our code we set it to a fairly large but somewhat random value we’ll use only for our application.

The configuration also specifies a logical name for the MySQL server. The connector includes this logical name within the topic field of every source record it produces, enabling your application to discern the origin of those records. Our example uses a server name of "products", presumably because the database contains product information. Of course, you can name this anything meaningful to your application.

When the MySqlConnector class runs, it reads the MySQL server’s binlog, which includes all data changes and schema changes made to the databases hosted by the server. Since all changes to data are structured in terms of the owning table’s schema at the time the change was recorded, the connector needs to track all of the schema changes so that it can properly decode the change events. The connector records the schema information so that, should the connector be restarted and resume reading from the last recorded offset, it knows exactly what the database schemas looked like at that offset. How the connector records the database schema history is defined in the last two fields of our configuration, namely that our connector should use the FileSchemaHistory class to store database schema history changes in the /path/to/storage/schemahistory.dat file on the local file system (again, this file can be named anything and stored anywhere).

Finally the immutable configuration is built using the build() method. (Incidentally, rather than build it programmatically, we could have read the configuration from a properties file using one of the Configuration.read(…​) methods.)

Now that we have a configuration, we can create our engine. Here again are the relevant lines of code:

// Create the engine with this configuration ...
try (DebeziumEngine<ChangeEvent<String, String>> engine = DebeziumEngine.create(Json.class)
        .using(props)
        .notifying(record -> {
            System.out.println(record);
        })
        .build()) {
}

All change events will be passed to the given handler method, which must match the signature of the java.util.function.Consumer<R> functional interface, where <R> must match the type of the format specified when calling create(). Note that your application’s handler function should not throw any exceptions; if it does, the engine will log any exception thrown by the method and will continue to operate on the next source record, but your application will not have another chance to handle the particular source record that caused the exception, meaning your application might become inconsistent with the database.

At this point, we have an existing DebeziumEngine object that is configured and ready to run, but it doesn’t do anything. The DebeziumEngine is designed to be executed asynchronously by an Executor or ExecutorService:

// Run the engine asynchronously ...
ExecutorService executor = Executors.newSingleThreadExecutor();
executor.execute(engine);

// Do something else or wait for a signal or an event

Your application can stop the engine safely and gracefully by calling its close() method:

// At some later time ...
engine.close();

or as the engine supports the Closeable interface it would be called automatically when the try block is left.

The engine’s connector will stop reading information from the source system, forward all remaining change events to your handler function, and flush the latest offets to offset storage. Only after all of this completes will the engine’s run() method return. If your application needs to wait for the engine to completely stop before exiting, you can do this with the ExcecutorService shutdown and awaitTermination methods:

try {
    executor.shutdown();
    while (!executor.awaitTermination(5, TimeUnit.SECONDS)) {
        logger.info("Waiting another 5 seconds for the embedded engine to shut down");
    }
}
catch ( InterruptedException e ) {
    Thread.currentThread().interrupt();
}

Alternatively you can register CompletionCallback while creating DebeziumEngine as a callback to be informed when the engine terminates.

Recall that when the JVM shuts down, it only waits for daemon threads. Therefore, if your application exits, be sure to wait for completion of the engine or alternatively run the engine on a daemon thread.

Your application should always properly stop the engine to ensure graceful and complete shutdown and that each source record is sent to the application exactly one time. For example, do not rely upon shutting down the ExecutorService, since that interrupts the running threads. Although the DebeziumEngine will indeed terminate when its thread is interrupted, the engine may not terminate cleanly, and when your application is restarted it may see some of the same source records that it had processed just prior to the shutdown.

Output Message Formats

DebeziumEngine#create() can accept multiple different parameters that affect the format in which the messages are received by the consumer. Allowed values are:

  • Connect.class - the output value is change event wrapping Kafka Connect’s SourceRecord

  • Json.class - the output value is a pair of key and value encoded as JSON strings

  • Avro.class - the output value is a pair of key and value encoded as Avro serialized records (see Avro Serialization for more details)

  • CloudEvents.class - the output value is a pair of key and value encoded as Cloud Events messages

Internally, the engine uses the apropriate Kafka Connect converter implementation to which the conversion is delegated. The converter can be parametrized using engine properties to modify its behaviour.

An example of JSON output format is

final Properties props = new Properties();
...
props.setProperty("converter.schemas.enable", "false"); // don't include schema in message
...
final DebeziumEngine<ChangeEvent<String, String>> engine = DebeziumEngine.create(Json.class)
    .using(props)
    .notifying((records, committer) -> {

        for (ChangeEvent<String, String> r : records) {
            System.out.println("Key = '" + r.key() + "' value = '" + r.value() + "'");
            committer.markProcessed(r);
        }
...

Where the ChangeEvent datatype is the key/value pair.

Message transformations

Before the messages are delivered to the handler it is possible to run them through a pipeline of Kafka Connect Simple Message Transforms (SMT). Each SMT can pass the message unchanged, modify it or filter it out. The chain is configured using property transforms. The property contains a comma-separated list of logical names of the transformations to be applied. Properties transforms.<logical_name>.type then defines the name of the implementation class for each transformation and transforms.<logical_name>.* configuration options that are passed to the transformation.

An example of the configuration is

final Properties props = new Properties();
...
props.setProperty("transforms", "filter, router");                                               // (1)
props.setProperty("transforms.router.type", "org.apache.kafka.connect.transforms.RegexRouter");  // (2)
props.setProperty("transforms.router.regex", "(.*)");                                            // (3)
props.setProperty("transforms.router.replacement", "trf$1");                                     // (3)
props.setProperty("transforms.filter.type", "io.debezium.embedded.ExampleFilterTransform");      // (4)
  1. Two transformations are defined - filter and router

  2. Implementation of the router transformation is org.apache.kafka.connect.transforms.RegexRouter

  3. The router transformation has two configurations options -regex and replacement

  4. Implementation of the filter transformation is io.debezium.embedded.ExampleFilterTransform

Advanced Record Consuming

For some use cases, such as when trying to write records in batches or against an async API, the functional interface described above may be challenging. In these situations, it may be easier to use the io.debezium.engine.DebeziumEngine.ChangeConsumer<R>. interface.

This interface has single function with the following signature:

/**
  * Handles a batch of records, calling the {@link RecordCommitter#markProcessed(Object)}
  * for each record and {@link RecordCommitter#markBatchFinished()} when this batch is finished.
  * @param records the records to be processed
  * @param committer the committer that indicates to the system that we are finished
  */
 void handleBatch(List<R> records, RecordCommitter<R> committer) throws InterruptedException;

As mentioned in the Javadoc, the RecordCommitter object is to be called for each record and once each batch is finished. The RecordCommitter interface is threadsafe, which allows for flexible processing of records.

You can optionally overwrite the offsets of the records that are processed. This is done by first building a new Offsets object by calling RecordCommitter#buildOffsets(), updating the offsets with Offsets#set(String key, Object value), and then calling RecordCommitter#markProcessed(SourceRecord record, Offsets sourceOffsets), with the updated Offsets.

To use the ChangeConsumer API, you must pass an implementation of the interface to the notifying API, as seen below:

class MyChangeConsumer implements DebeziumEngine.ChangeConsumer<RecordChangeEvent<SourceRecord>> {
  public void handleBatch(List<RecordChangeEvent<SourceRecord>> records, RecordCommitter<RecordChangeEvent<SourceRecord>> committer) throws InterruptedException {
    ...
  }
}
// Create the engine with this configuration ...
DebeziumEngine<RecordChangeEvent<SourceRecord>> engine = DebeziumEngine.create(ChangeEventFormat.of(Connect.class))
        .using(props)
        .notifying(new MyChangeConsumer())
        .build();

If JSON format is used (an equivalent would work for other formats too) then the code would look like:

class JsonChangeConsumer implements DebeziumEngine.ChangeConsumer<ChangeEvent<String, String>> {
  public void handleBatch(List<ChangeEvent<String, String>> records,
    RecordCommitter<ChangeEvent<String, String>> committer) throws InterruptedException {
    ...
  }
}
// Create the engine with this configuration ...
DebeziumEngine<ChangeEvent<String, String>> engine = DebeziumEngine.create(Json.class)
        .using(props)
        .notifying(new MyChangeConsumer())
        .build();

Engine Properties

The following configuration properties are required unless a default value is available (for the sake of text formatting the package names of Java classes are replaced with <…​>).

Property

Default

Description

name

Unique name for the connector instance.

connector.class

The name of the Java class for the connector, e.g <…​>.MySqlConnector for the MySQL connector.

offset.storage

<…​>.FileOffsetBackingStore

The name of the Java class that is responsible for persistence of connector offsets. It must implement <…​>.OffsetBackingStore interface.

offset.storage.file.filename

""

Path to file where offsets are to be stored. Required when offset.storage is set to the <…​>.FileOffsetBackingStore.

offset.storage.topic

""

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the <…​>.KafkaOffsetBackingStore.

offset.storage.partitions

""

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the <…​>.KafkaOffsetBackingStore.

offset.storage.replication.factor

""

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the <…​>.KafkaOffsetBackingStore.

offset.commit.policy

<…​>.PeriodicCommitOffsetPolicy

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface <…​>.OffsetCommitPolicy. The default is a periodic commity policy based upon time intervals.

offset.flush.interval.ms

60000

Interval at which to try committing offsets. The default is 1 minute.

offset.flush.timeout.ms

5000

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

errors.max.retries

-1

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, > 0 = num of retries).

errors.retry.delay.initial.ms

300

Initial delay (in ms) for retries when encountering connection errors. This value will be doubled upon every retry but won’t exceed errors.retry.delay.max.ms.

errors.retry.delay.max.ms

10000

Max delay (in ms) between retries when encountering connection errors.

Database schema history properties

Some of the connectors also requires additional set of properties that configures database schema history:

  • MySQL

  • SQL Server

  • Oracle

  • Db2

Without proper configuration of the database schema history the connectors will refuse to start. The default configuration expects a Kafka cluster to be available. For other deployments, a file-based database schema history storage implementation is available.

Property Default Description

schema.history.internal

<…​>.KafkaSchemaHistory

The name of the Java class that is responsible for persistence of the database schema history.
It must implement <…​>.SchemaHistory interface.

schema.history.internal.file.filename

""

Path to a file where the database schema history is stored.
Required when schema.history.internal is set to the <…​>.FileSchemaHistory.

schema.history.internal.kafka.topic

""

The Kafka topic where the database schema history is stored.
Required when schema.history.internal is set to the <…​>.KafkaSchemaHistory.

schema.history.internal.kafka.bootstrap.servers

""

The initial list of Kafka cluster servers to connect to. The cluster provides the topic to store the database schema history.
Required when schema.history.internal is set to the <…​>.KafkaSchemaHistory.

Handling Failures

When the engine executes, its connector is actively recording the source offset inside each source record, and the engine is periodically flushing those offsets to persistent storage. When the application and engine shutdown normally or crash, when they are restarted the engine and its connector will resume reading the source information from the last recorded offset.

So, what happens when your application fails while an embedded engine is running? The net effect is that the application will likely receive some source records after restart that it had already processed right before the crash. How many depends upon how frequently the engine flushes offsets to its store (via the offset.flush.interval.ms property) and how many source records the specific connector returns in one batch. The best case is that the offsets are flushed every time (e.g., offset.flush.interval.ms is set to 0), but even then the embedded engine will still only flush the offsets after each batch of source records is received from the connector.

For example, the MySQL connector uses the max.batch.size to specify the maximum number of source records that can appear in a batch. Even with offset.flush.interval.ms is set to 0, when an application restarts after a crash it may see up to n duplicates, where n is the size of the batches. If the offset.flush.interval.ms property is set higher, then the application may see up to n * m duplicates, where n is the maximum size of the batches and m is the number of batches that might accumulate during a single offset flush interval. (Obviously it is possible to configure embedded connectors to use no batching and to always flush offsets, resulting in an application never receiving any duplicate source records. However, this dramatically increases the overhead and decreases the throughput of the connectors.)

The bottom line is that when using embedded connectors, applications will receive each source record exactly once during normal operation (including restart after a graceful shutdown), but do need to be tolerant of receiving duplicate events immediately following a restart after a crash or improper shutdown. If applications need more rigorous exactly-once behavior, then they should use the full Debezium platform that can provide exactly-once guarantees (even after crashes and restarts).